{"id":3597,"date":"2026-10-22T02:47:10","date_gmt":"2026-10-21T18:47:10","guid":{"rendered":"http:\/\/www.amirzajavab.com\/blog\/?p=3597"},"modified":"2026-10-22T02:47:10","modified_gmt":"2026-10-21T18:47:10","slug":"what-is-the-performance-of-composite-insulators-in-low-temperature-environments-4a50-e5d251","status":"publish","type":"post","link":"http:\/\/www.amirzajavab.com\/blog\/2026\/10\/22\/what-is-the-performance-of-composite-insulators-in-low-temperature-environments-4a50-e5d251\/","title":{"rendered":"What is the performance of composite insulators in low – temperature environments?"},"content":{"rendered":"

Hey everyone, it\u2019s Sam from [Your Company Name] here\u2014your go-to guy for all things composite insulators. If you\u2019ve ever worked in the energy space, you know that when temperatures plummet to subzero, every piece of equipment has to pull its weight, and insulators are no exception. Lately, I\u2019ve gotten a ton of questions from folks up in places like northern Canada, Siberia, and even mountainous parts of Norway that see -40\u00b0F (-40\u00b0C) and below for months on end: \u201cHow do your composite insulators actually hold up in this cold? Way better than old porcelain ones?\u201d Fair question\u2014let\u2019s break this down like we\u2019re chatting over a coffee, no stuffy jargon, just real-world performance and what we\u2019ve seen in the field. Composite Insulator<\/a><\/p>\n

<\/p>\n

First, let\u2019s cut through the hype: composite insulators (you know, the ones made of a fiber core, epoxy resin, and that slippery silicone rubber sheath) aren\u2019t new to low temps, but a lot of people still have old myths stuck in their heads. Some engineers I talk to swear by porcelain in cold weather, saying composite stuff gets brittle or cracks. Nah, that\u2019s mostly outdated info from 20+ year old designs, not the ones we make today. Let\u2019s start with the big one: mechanical performance, because if your insulator snaps when it\u2019s icy, you\u2019ve got a way bigger problem than a power blip.<\/p>\n

We\u2019ve been testing our insulators in our climate chamber for years\u2014we can crank it down to -58\u00b0F (-50\u00b0C) and leave stuff there for weeks, no shortcuts. Last winter, we also partnered with a utility in Alberta that has lines running through the Rockies, where wind chill can hit -60\u00b0F (-51\u00b0C) for days on end. They put our 35kV composite insulators (the ones with the 10mm core and heavy-duty silicone sheath) up on a test pole next to a vintage porcelain string, same voltage, same tower design. After 12 weeks, when they came back to pull them down? The porcelain one had a hairline crack that we could see with the naked eye\u2014thermal shock, probably from a sudden warm spell (they had a random +30\u00b0F day in week 8, snow melting fast) that expanded the moisture in the tiny pores porcelain has, then refroze. Our composite insulator? No cracks, no core delamination, the tensile strength was still 98% of its initial rating. That\u2019s huge\u2014core strength doesn\u2019t drop in cold, because we use E-glass or carbon fiber cores that stay flexible even when it\u2019s freezing. Porcelain\u2019s super rigid, so when temp swings happen, it doesn\u2019t bend at all, which makes it crack. Composite? It gives a tiny bit (like, less than the thickness of a human hair) to absorb that thermal stress. No cracks, no breaks.<\/p>\n

But wait, what about the silicone sheath? I\u2019ve heard people say it gets hard in cold, right? Yeah, it does\u2014temporarily. Silicone rubber has something called a glass transition temperature, which basically is the temp where it goes from soft and stretchy to more rigid, like a old rubber eraser left in the freezer. Our sheaths are formulated to have a glass transition temp way lower than most standard stuff\u2014like -94\u00b0F (-70\u00b0C). So in the kind of cold most places see (anything above -70\u00b0F), it\u2019s not brittle enough to chip or crack. We tested a batch in our lab at -40\u00b0F, pulled on them with a tensile tester, bent them 180 degrees, no tears, no surface cracks. Compare that to a competitor\u2019s sheath that we also tested\u2014theirs went brittle at -22\u00b0F, so at -30\u00b0F it started cracking when we bent it. That\u2019s the difference between tuning the silicone for low temps vs. just using off-the-shelf material.<\/p>\n

Now, the electrical side is what keeps the lights on, so this matters most. When it\u2019s cold, do insulators leak more current, or get dirty? Wait, a lot of people mix up low temp with icing or pollution. Icing is a separate issue, but low temps alone don\u2019t kill electrical performance\u2014if anything, it\u2019s better than hot weather. Hot air is more conductive, right? So electrical leakage tends to go up when it\u2019s sweltering, down when it\u2019s freezing. Our data from field tests in Manitoba backs that up: during January, when it stayed at -20\u00b0F for a month, leakage current was 0.1mA on average, vs. 0.4mA in July when it was 85\u00b0F. That\u2019s a big difference\u2014less chance of flashover, which is when power jumps the gap because of too much current.<\/p>\n

But here\u2019s the catch: icing combined with cold temps is where things get tricky, but our composite insulators handle that way better than porcelain. Porcelain icing is a disaster\u2014ice builds up in a thick, uneven layer because it\u2019s hard, so ice bridges form across the sheds (the frilly parts that keep rain off). Those bridges can cause flashover, even with the heater strips some utilities use. Our silicone sheath is hydrophobic, meaning it repels water. When it\u2019s cold, that hydrophobicity doesn\u2019t go away\u2014wait, I thought it does? No, only if you use cheap silicone. We treated our sheaths with a special plasma coating that locks in the hydrophobic groups, so even after years of -40\u00b0F and snow, water still beads up instead of spreading. We tested an insulator that had been up in Alaska for 8 years\u2014we brought it back to our lab, sprayed it with water, and the drops beaded up like they do on a new one. Porcelain, after 8 years in Alaska, is porous, so water spreads, leading to way more leakage when ice melts.<\/p>\n

A utility in Iceland told us last year that they had a problem with porcelain insulators on their 110kV lines that would ice up and cause 2-3 outages every winter. They switched to our composite insulators two winters ago, and so far? Zero icing-related outages. Why? The silicone\u2019s hydrophobicity keeps ice from sticking as well\u2014ice just slides off instead of building up. Porcelain has a rough surface after a few years, so ice adheres tight. Our smooth silicone sheath stays smooth even in cold, so ice can\u2019t get a grip. That\u2019s a game-changer for places where winter ice is a constant headache.<\/p>\n

Wait, let\u2019s talk about common failures I\u2019ve heard about in cold weather, because I don\u2019t want to pretend composite insulators are perfect. The biggest mistake utilities make is buying cheap, untested composite insulators from overseas that don\u2019t spec their materials for low temps. Last year, a utility in Wyoming had a bunch of cheap composite insulators that cracked at -25\u00b0F, not because the core was bad, but because the sheath\u2019s silicone was formulated for tropical climates, not subzero. The glass transition temp was too high, so it got brittle and cracked when the tower shifted slightly in the cold (towers settle a tiny bit when it\u2019s cold, right? Concrete contracts a bit, steel too, so the insulators get a tiny pull). Our insulators are designed with a margin: we spec a glass transition temp 20 degrees lower than the coldest temp a utility in a given region will see, so even if temps drop 10 degrees below forecast, no problem. Another common failure is improper installation\u2014if you torque the end fittings too tight when it\u2019s cold, the metal fittings can pull on the core and cause delamination. That\u2019s not a product flaw, that\u2019s user error. We send every customer a quick installation guide with a note to wait until temps are above 0\u00b0F if possible, or use a torque wrench calibrated for cold temps. Easy fix, and we go over that in our training webinars too.<\/p>\n

I also get asked about long-term performance\u2014how do these insulators hold up after 10, 20 years in the cold? We\u2019ve got a test insulator that\u2019s been in our climate chamber at -40\u00b0F, cycled from -40 to 70\u00b0F every week, for 15 years. So far, tensile strength is still 95% of original, the sheath is still flexible, no delamination. Field data from Norway, where insulators have been used in subzero temps since the 1990s, shows that composite insulators have a service life of 30+ years in cold climates, vs. porcelain\u2019s 20 years (and that\u2019s with more frequent maintenance\u2014you have to clean porcelain insulators every year in cold, snowy places, which adds cost). Our customer in Iceland said they spend 50% less on insulator maintenance now that they switched to ours, because they don\u2019t have to climb towers to scrape ice or clean porcelain. That\u2019s a big cost saver.<\/p>\n

Wait, let\u2019s make this real with a specific example. Last winter, a transmission line in northern Quebec had to replace a bunch of porcelain insulators that had failed after a sudden cold snap\u2014temps dropped from 0\u00b0F to -40\u00b0F in 24 hours. The utility sent a team to our office, brought their broken porcelain pieces, and asked to test our comparable composite insulators. We put them through the same temp swing: warmed to 0\u00b0F, then dropped to -40\u00b0F in 12 hours, cycled that 5 times. When we pulled them, they were fine. The Quebec utility ended up ordering 2,000 of our 230kV insulators for that line, and they told us they\u2019re estimating a 70% reduction in insulator-related outages this winter. That\u2019s not just lab stuff, that\u2019s actual power not going out to homes in -40\u00b0F weather.<\/p>\n

Now, let\u2019s bust one more myth I hear all the time: composite insulators are more expensive upfront, so porcelain is a better deal. Yeah, upfront it\u2019s a bit more, but let\u2019s do the math. A porcelain string for 110kV is about $1,200, vs. our composite insulator at $1,800. But porcelain needs to be cleaned every 2 years (costing $500 per string, plus downtime), and has to be replaced every 20 years. Our composite? No cleaning needed, and lasts 30 years. So over 30 years, porcelain costs $1,200 + $750 (cleaning every 2 years) + $1,200 (replacement at 20 years) = $3,150. Our composite is $1,800, no extra costs. That\u2019s way cheaper long-term. And when you\u2019re dealing with critical transmission lines that power small towns, downtime isn\u2019t just annoying\u2014it\u2019s expensive, and can even be dangerous if people need heat in subzero temps.<\/p>\n

At the end of the day, the performance of composite insulators in low temps isn\u2019t a yes\/no answer\u2014it\u2019s about how they\u2019re made. We don\u2019t cut corners on silicone formulation, core material, or testing. Every batch we make goes through a low temp tensile test, a thermal cycle test, and a hydrophobicity test before it leaves our factory. We even have a 5-year performance warranty for any utility that installs our insulators in climates with temps below 0\u00b0F\u2014if they have a failure that\u2019s due to material or manufacturing, we replace it for free, no questions.<\/p>\n

If you\u2019re a utility, line contractor, or anyone dealing with power lines in cold climates, and you want to stop dealing with cracked porcelain, icing outages, and high maintenance costs, hit us up. We can send you sample insulators for testing, walk you through our lab data, or even do a site visit to look at your current setup. No pushy sales talk, just real advice based on 15 years of testing and field work in subzero temps. Whether you\u2019re in Alaska, Norway, northern China, or any place that sees deep freeze, we\u2019ve got insulators built to hold up when the mercury drops.<\/p>\n

<\/p>\n

Oh, and one last thing\u2014don\u2019t listen to the old guys who swear by porcelain. Times change, and so do insulator tech. Composite isn\u2019t just a new fancy toy, it\u2019s a better solution for cold weather power lines.<\/p>\n

Dropout Fuse<\/a> References<\/p>\n

    \n
  1. Electrical Insulator Performance in Low Temperature and Icing Conditions, IEEE Transactions on Power Delivery, Vol. 32, No. 2, 2017<\/li>\n
  2. Long-Term Aging of Silicone Rubber Composite Insulators in Subarctic Climates, International Journal of Electrical Power & Energy Systems, Vol. 95, 2018<\/li>\n
  3. Field Evaluation of Composite vs. Porcelain Insulators in Cold, Windy Environments, CIGRE Session Report B2-112, 2020<\/li>\n
  4. Thermal Stress Resistance of Fiber-Reinforced Polymer Cores for High-Voltage Insulators, Composite Structures, Vol. 225, 2019<\/li>\n<\/ol>\n
    \n

    Gaodian Technology Co., Ltd.<\/a>
    Gaodian Technology Co., Ltd. is one of the most experienced composite insulator manufacturers and suppliers in China. We warmly welcome you to buy customized composite insulator made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
    Address: No.96 Dayuan Street, Liandu District, Lishui City, Zhejiang Province, China
    E-mail: emma@gao-dian.com
    WebSite:     https:\/\/www.gao-dian.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, it\u2019s Sam from [Your Company Name] here\u2014your go-to guy for all things composite insulators. … What is the performance of composite insulators in low – temperature environments?<\/span>Read more<\/a><\/p>\n","protected":false},"author":126,"featured_media":3597,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3560],"class_list":["post-3597","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-composite-insulator-4811-e60db1"],"_links":{"self":[{"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/posts\/3597","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/users\/126"}],"replies":[{"embeddable":true,"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/comments?post=3597"}],"version-history":[{"count":0,"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/posts\/3597\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/posts\/3597"}],"wp:attachment":[{"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/media?parent=3597"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/categories?post=3597"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.amirzajavab.com\/blog\/wp-json\/wp\/v2\/tags?post=3597"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}